Navigation
23 Users online :: 23 Guests and 0 Registered
Most popular FAQs 
- Can my ONKYO amplifier or receiver drive 4 ohm ... (64217 views)
- Can I connect an HDD drive to the USB ... (63948 views)
- Are there any compatibility problems with Panasonic G10 and ... (62097 views)
- Which advantage has the ONKYO Universal Port? (60226 views)
- Can I use the receiver TX-SR 506/507/576/577/605/606/607/705/706/707/805/806/875/876 and TX-NR ... (58933 views)
- Can I use Audyssey with only 5.1 speakers? (58666 views)
- The remote control of TX-SR 505/507/577/605/606/607/etc cannot control my ... (58498 views)
- Is upscaling possible at TX-SR706/707/806/875/876 and TX-NR 807/905/906 also ... (56812 views)
- Using HDMI input with my receiver TX-SR 507 and ... (56613 views)
- Is it OK to put a magnetically shielded speaker ... (56281 views)
Latest FAQs
- Is there anything to bear in mind then updating ... (2009-10-27 14:30)
- Can I use the DS-A3 (docking station for iPod) ... (2009-10-12 11:22)
- Are there any compatibility problems with Panasonic G10 and ... (2009-08-20 13:23)
- Which advantage has the ONKYO Universal Port? (2009-08-07 15:17)
- Is it OK to put a magnetically shielded speaker ... (2009-08-07 14:33)
Sticky FAQs
Home Theater » AV Receiver
ID #1028
How much power consumption does the AVR use in standby mode?
Our AVR have a very low consumption in standby mode, normally less than 10Watts. But if you activate HDMI-Control, Power-Control or TV-Control the HDMI board is always “active”, therefore you have a higher power consumption in “Standby-Mode”.
Last update: 2009-08-07 14:13
Author: FAQ Admin
Revision: 1.0
