Navigation
39 Users online :: 39 Guests and 0 Registered
Most popular FAQs 
- Can my ONKYO amplifier or receiver drive 4 ohm ... (64205 views)
- Can I connect an HDD drive to the USB ... (63935 views)
- Are there any compatibility problems with Panasonic G10 and ... (62086 views)
- Which advantage has the ONKYO Universal Port? (60214 views)
- Can I use the receiver TX-SR 506/507/576/577/605/606/607/705/706/707/805/806/875/876 and TX-NR ... (58915 views)
- Can I use Audyssey with only 5.1 speakers? (58655 views)
- The remote control of TX-SR 505/507/577/605/606/607/etc cannot control my ... (58487 views)
- Is upscaling possible at TX-SR706/707/806/875/876 and TX-NR 807/905/906 also ... (56797 views)
- Using HDMI input with my receiver TX-SR 507 and ... (56599 views)
- Is it OK to put a magnetically shielded speaker ... (56265 views)
Latest FAQs
- Is there anything to bear in mind then updating ... (2009-10-27 14:30)
- Can I use the DS-A3 (docking station for iPod) ... (2009-10-12 11:22)
- Are there any compatibility problems with Panasonic G10 and ... (2009-08-20 13:23)
- Which advantage has the ONKYO Universal Port? (2009-08-07 15:17)
- Is it OK to put a magnetically shielded speaker ... (2009-08-07 14:33)
Sticky FAQs
Home Theater » AV Receiver
ID #1001
Can I use the receiver TX-SR 506/507/576/577/605/606/607/705/706/707/805/806/875/876 and TX-NR 807/905/906 with 4 ohm speakers in bi–amping mode?
Yes you have to select at hardware setup of the receiver the speaker impedance to 4 ohm.
Last update: 2009-08-07 13:51
Author: FAQ Admin
Revision: 1.0
