Navigation
40 Users online :: 40 Guests and 0 Registered
Most popular FAQs 
- Can my ONKYO amplifier or receiver drive 4 ohm ... (64214 views)
- Can I connect an HDD drive to the USB ... (63943 views)
- Are there any compatibility problems with Panasonic G10 and ... (62095 views)
- Which advantage has the ONKYO Universal Port? (60222 views)
- Can I use the receiver TX-SR 506/507/576/577/605/606/607/705/706/707/805/806/875/876 and TX-NR ... (58929 views)
- Can I use Audyssey with only 5.1 speakers? (58662 views)
- The remote control of TX-SR 505/507/577/605/606/607/etc cannot control my ... (58496 views)
- Is upscaling possible at TX-SR706/707/806/875/876 and TX-NR 807/905/906 also ... (56808 views)
- Using HDMI input with my receiver TX-SR 507 and ... (56610 views)
- Is it OK to put a magnetically shielded speaker ... (56275 views)
Latest FAQs
- Is there anything to bear in mind then updating ... (2009-10-27 14:30)
- Can I use the DS-A3 (docking station for iPod) ... (2009-10-12 11:22)
- Are there any compatibility problems with Panasonic G10 and ... (2009-08-20 13:23)
- Which advantage has the ONKYO Universal Port? (2009-08-07 15:17)
- Is it OK to put a magnetically shielded speaker ... (2009-08-07 14:33)
Sticky FAQs
Home Theater » AV Receiver
ID #1009
Using HDMI input with my receiver TX-SR 507 and above (576/577/605/606/607/...) and TX-NR 905/906 I do not receive an 5.1 audio signal?
The Audio Signal going into the receiver must be bitsream for the receiver to do any decoding of DD, DD-True HD, DTS-MA or DTS, please check the source(DVD, Blu-ray) and correct for bitstream output.
Last update: 2009-08-07 13:57
Author: FAQ Admin
Revision: 1.0
