Navigation
31 Users online :: 31 Guests and 0 Registered
Most popular FAQs 
- Can my ONKYO amplifier or receiver drive 4 ohm ... (64203 views)
- Can I connect an HDD drive to the USB ... (63933 views)
- Are there any compatibility problems with Panasonic G10 and ... (62084 views)
- Which advantage has the ONKYO Universal Port? (60211 views)
- Can I use the receiver TX-SR 506/507/576/577/605/606/607/705/706/707/805/806/875/876 and TX-NR ... (58913 views)
- Can I use Audyssey with only 5.1 speakers? (58653 views)
- The remote control of TX-SR 505/507/577/605/606/607/etc cannot control my ... (58485 views)
- Is upscaling possible at TX-SR706/707/806/875/876 and TX-NR 807/905/906 also ... (56795 views)
- Using HDMI input with my receiver TX-SR 507 and ... (56595 views)
- Is it OK to put a magnetically shielded speaker ... (56262 views)
Latest FAQs
- Is there anything to bear in mind then updating ... (2009-10-27 14:30)
- Can I use the DS-A3 (docking station for iPod) ... (2009-10-12 11:22)
- Are there any compatibility problems with Panasonic G10 and ... (2009-08-20 13:23)
- Which advantage has the ONKYO Universal Port? (2009-08-07 15:17)
- Is it OK to put a magnetically shielded speaker ... (2009-08-07 14:33)
Sticky FAQs
Pure HiFi » Amplifier
ID #1051
How do I connect my equalizer to my receiver?
There are two methods of connecting an equalizer, by either using the tape monitor or the main pre-in & output jacks.
To connect through the Tape loop, connect the EQ L&R outputs to the Tape-in (play) jacks of the receiver, then take the EQ L&R inputs to the "Tape-Out" (REC) of the receiver. On the front of the receiver you will need to select the "Tape Monitor" to access the equalizer. To connect through main pre-out/ pre-in jacks, connect the EQ L&R outputs to the receiver main-in inputs (pre-in), then connect the EQ L&R inputs to the main out (pre-out)
Last update: 2009-08-07 14:31
Author: FAQ Admin
Revision: 1.0
